- Graphite Powder
- Hydrocarbon rubber
NDR 245 - Lithium Hydroxide
monohidratado - 12 HSA
- HCO
- N220
- DEG
- TECHNOL MC-50
- TECHNOL V-03
- TECHNOL V-40
- ZDDP
- TBN
Graphite powder is widely used in steel and iron casting as a carbon additive to increase the carbon content of steel or iron. Our product is of high quality and at a lower price.
| Fixed carbon (FC): | 70%, 75%, 78%, 80%, 83%, 85% |
| volatile matter: | Less than 4%, Less than 3% |
| Azufre: | Less than 0,2%, Less than 0,1%, Less than 0,05% |
| Grain size: | 1-3 mm, 1-5 mm, 1-6 mm, 1-8 mm, 1-10 mm, 1-30 mm, 0,3-3 mm |
| Product names: | Medium Expandable Graphite Powder in Natural Flakes |
| Physical properties | Black flake powder, insoluble in water, density is 2.25 g/cm3, is an allotrope of elemental carbon |
It is mainly used in pencil leads, refractory materials, conductive materials, lubricating materials, coal manufacturing and radiation protection materials. Also as a positive filling material of high energy zinc manganese alkaline battery, it has the character of high purity, good conductivity and low gas evolution.
| Article | Standard |
| Ash content | ≤ 0,1 % |
| Humidity | ≤ 0,5 % |
| Particle size (malla 800) | ≤ 95 % |
| Gas evolution (ml/g.día): | ≤ 0,1 % |
| Apparent Specific Gravity (g/ml): | 0,14 ± 0,02 |
| D50 (μm) | 12-16 |
| Fe (ppm) | ≤ 30 |
| Mes (ppm) | ≤ 1 |
| Cu (ppm) | ≤ 1 |
| CD (ppm) | ≤ 1 |
| Pb (ppm) | ≤ 5 |
| Hg (ppm) | ≤ 1 |
| cr (ppm) | ≤ 8 |
| Co (ppm) | ≤ 1 |
| V (ppm) | ≤ 1 |
| Co (ppm) | ≤ 1 |
| Sb (ppm) | ≤ 0,2 |
| Como (ppm) | ≤ 0,5 |
| Como (ppm) | ≤ 0,5 |
| Aluminio (ppm) | ≤ 50 |
| Ni (ppm) | ≤ 10 |
NDR 245 hydrocarbon rubber is a semi-crystalline ethylene-propylene-diene (EPDM) terpolymer with very low diene content used as a viscosity modifier in formulated multigrade motor oils, greases and lubricants. NDR 245 is manufactured with INSITE™ technology.
NORDEL™ IP 3640 Hydrocarbon Rubber is a low-diene, amorphous ethylene-propylene-diene (EPDM) terpolymer and is suitable for heat-resistant, peroxide-cured moldings. NORDEL IP 3640 can be mixed with butyl rubber to improve the processing and vulcanization properties of automobile and bicycle tire tubes.
Due to its high specific heat, lithium is used in heat transfer applications, and due to its high electrochemical potential, it constitutes a suitable anode for electric batteries. It is also given the following uses:
| Lithium chloride and lithium bromide have high hygroscopicity, making them excellent drying agents. The second is used in contraction heat pumps, among other compounds such as lithium nitrate. |
| Lithium salts, particularly lithium carbonate (Li2CO3) and lithium citrate, are used in the treatment of mania, depression and bipolarity, as well as other psychopathologies. It is a mood stabilizer. Its mechanisms of action are several: 1. It blocks the release of dopamine - it blocks the hypersensitivity of dopamine receptors; 2. Blocks results in the postsynaptic neuron -blocks the reuse of phosphate groups of the inositol triphosphate that activates the release of calcium-; 3. It replaces the sodium in the synaptic channel because it is smaller and the action potential slows down, causing the patient to calm down. Lithium is not a substrate for the sodium potassium ATPase pump, which prevents the passage of sodium ions, replacing the concentration of sodium, which in high concentrations can be toxic. |
| Lithium stearate is a general purpose lubricant in high temperature applications. |
| Lithium is an agent highly used in the synthesis of organic compounds, used for the coordination of ligands through the lithiated intermediate. |
| Lithium hydroxide is used in spacecraft and submarines to purify the air by removing carbon dioxide. |
| It is a common component of aluminum, cadmium, copper and manganese alloys used in aeronautical construction, and has been successfully used in the manufacture of ceramics and lenses, such as the 5.08 m diameter (200 in) telescope of Mount Palomar. |
| It also has nuclear applications. |
Product Description: 12-Hydroxystearic acid is the mixed fatty acid obtained by hydrolysis of hydrogenated castor oil. It is a waxy, brittle solid with a high melting point at room temperature. It should be stored away from heat to avoid deterioration.
| 12-HSA is used as a thickener for silicone grease, as a rubber activator/accelerator, and in the manufacture of certain personal care products, among other applications. |
Product Description: Due to its characteristics, hydrogenated castor oil, or castor wax, is one of the ingredients in many products. It is found in some varnishes, soaps and in different types of cosmetics. If you look closely at the ingredients in your beauty products, there's a good chance you'll see the word hydrogenated wherever you read castor oil, as it's the safest form. This is also true for certain products labeled organic.
Hydrogenated castor oil in its unmodified state is usually available for sale in the form of a hard, brittle block, flake, or yellowish-white powder. It is insoluble in water and completely odorless. Specifically, this substance is produced during hydrogenation, a chemical reaction that takes place during the combination, by catalysis, of pure castor oil with hydrogen.
Product Description: Phillips Carbon Black N220 is a hard particle furnace carbon black for a variety of applications in paint, rubber, etc.
Diethylene glycol is used in the manufacture of polyester resins, polyurethanes, and saturated and unsaturated plasticizers. DEG is used as a building block in organic synthesis, for example of morpholine and 1,4-dioxane. It is a solvent for nitrocellulose, resins, dyes, oils and other organic compounds. It is a humectant for tobacco, cork, printing inks and glues. It is also a component of brake fluid, lubricants, wallpaper strippers, artificial fog and haze solutions, and heating and cooking fuel. In personal care products (e.g., skin creams and lotions, deodorants), DEG is often replaced by selected diethylene glycol ethers. A dilute solution of diethylene glycol can also be used as a cryoprotectant; however, ethylene glycol is much more commonly used. Most ethylene glycol antifreeze contains a small percentage of diethylene glycol, present as a byproduct of ethylene glycol production.
Additive package specially designed for 4-stroke motorcycles and scooters as well as internal combustion engines. This additive has the advantage that it can be used in cascade and covers a wide range of viscosities. TECHNOL MC 50 covers API SJ, SL and SN, as well as JASO MA and MA-2. If a booster is used, JASO MB can be made and thus we can cover all the requirements for all motorcycles and scooters that circulate globally.
Advanced additive package to make CK-4 and FA-4 classification oils for heavy-duty diesel engines. This additive can be used in cascade and meets the performance specifications of various vehicle manufacturers. TECHNOL V-03 covers API CK-4, CK-4/SN, CJ-4, CI-4 Plus.
Additive package for the formulation of lubricants for super high performance diesel engines (SHPD) that covers the requirements of ACEA E7 and API CI-4. It has improved performance in conjunction with several vehicle manufacturers and provides proven high durability and reliability.
Antioxidant additive and corrosion inhibitor. It has effective anti-wear protection to avoid metal-metal contact under high load conditions as well as EP extreme pressure properties. It can be used for the production of industrial lubricants such as gear and hydraulic oils and combined with detergents and dispersants it can be used for the production of all grades of motor oils.
Additive based on Calcium Sulfonate, used to improve detergency, dispersancy and as an acid neutralizer for lubricating oils for both gasoline and diesel engines, as well as for marine diesel oils.
